Eni Alaria 2
Eni Alaria 2 Specification
- Packaging Type
- Standard Sealed Container
- Chemical Composition
- Lithium soap base
- Color
- Amber
- Water Content Vol%
- <0.1
- Ash %
- <0.5
- Oil Type
- Mineral
- Application
- Bearings, Joints, Chassis, General Lubrication
- Grease
- Yes
- Type
- Multipurpose Grease
- Operating Temperature
- -20°C to +120°C
- Weight
- Approximately 1 kg (for 1 litre pack)
- Use
- Lubrication of mechanical parts
- Smell
- Characteristic
- Density
- 0.89 Gram per cubic centimeter(g/cm3)
- Viscosity
- NLGI 2
- Size
- 1 kg, 18 kg, 180 kg
- Pack Type
- Bucket, Drum, Cartridge
- Vehicle Type
- Industrial, Automotive
- Mechanical Stability
- High
- Base Oil Viscosity at 40C
- 150 mm2/s
- Shelf Life
- 36 months in original sealed packaging
- Dropping Point
- >190C
- Corrosion Resistance
- Excellent protection against rust and corrosion
- Timken OK Load
- 18 kg
- Oxidation Stability
- Good
- Worked Penetration at 25C (60 Strokes)
- 265-295
- Pour Point
- -25C

More Products in Alaria Category
Eni Alaria 3
Viscosity : NLGI 3
Density : 0.90 Gram per cubic centimeter(g/cm3)
Use : Lubrication under severe operating conditions, where a NLGI 3 grade is required
Smell : Characteristic
Weight : Varies as per pack
Operating Temperature : 20°C to +120°C
Eni Alaria 3 HT
Viscosity : NLGI 3
Density : 0.92 Gram per cubic centimeter(g/cm3)
Use : Lubrication of parts exposed to high temperature
Smell : Characteristic
Weight : 1 kg (approx. per liter)
Operating Temperature : 20°C to +180°C (peak up to 200°C)
Eni Alaria 7 Mineral oils
Viscosity : Refer to datasheet (e.g. kinematic viscosity at 40°C)
Density : 0.85 Gram per cubic centimeter(g/cm3)
Use : Industrial heat transfer applications
Smell : Characteristic mineral oil smell
Weight : Varied based on packaging
Operating Temperature : Up to 300°C

Send Inquiry



