Eni Alaria 3
Eni Alaria 3 Specification
- Density
- 0.90 Gram per cubic centimeter(g/cm3)
- Viscosity
- NLGI 3
- Chemical Composition
- Mineral oil, Lithium soap thickener
- Ash %
- <0.1%
- Application
- Bearings, Bushings, General Industrial and Automotive Applications
- Water Content Vol%
- <0.1%
- Weight
- Varies as per pack
- Oil Type
- Mineral Oil Based Grease
- Operating Temperature
- -20°C to +120°C
- Type
- Grease Lubricant
- Use
- Lubrication under severe operating conditions, where a NLGI 3 grade is required
- Color
- Amber
- Packaging Type
- Drum, Bucket, Can
- Smell
- Characteristic
- Grease
- Lithium Base
- Size
- 500g, 1kg, 5kg, 15kg, 18kg, 50kg, 180kg
- Pack Type
- Can, Drum, Bucket
- Vehicle Type
- Automotive, Industrial
- Worked Penetration (60 strokes, 25°C)
- 220-250 mm/10
- Water Washout
- Low
- Mechanical Stability
- High
- Timken OK Load
- Not less than 18 kg
- Service Life
- Extended
- Drop Point
- >180°C
- Corrosion Resistance
- Excellent
- Storage Life
- 24 months in sealed container
- Shear Stability
- Very Good

More Products in Alaria Category
Eni Alaria 3 HT
Ash % : <0.1%
Chemical Composition : Polyurea Thickener, Synthetic Hydrocarbon Oil
Viscosity : NLGI 3
Operating Temperature : 20°C to +180°C (peak up to 200°C)
Oil Type : Synthetic Base Oil
Water Content Vol% : <0.1%
Eni Alaria 2
Ash % : <0.5
Chemical Composition : Lithium soap base
Viscosity : NLGI 2
Operating Temperature : 20°C to +120°C
Oil Type : Mineral
Water Content Vol% : <0.1
Eni Alaria 7 Mineral oils
Ash % : 0%
Chemical Composition : Mineral oilbased
Viscosity : Refer to datasheet (e.g. kinematic viscosity at 40°C)
Operating Temperature : Up to 300°C
Oil Type : Mineral oil
Water Content Vol% : Max 0.1%
Get in touch with us

Send Inquiry



